|
The latest version of the installer and the tool for checking the existence of the Zend Optimizer are always available at http://distrib.amirocms.com/distrib/public/installer/. The basic instructions for the installation are also copied here for your reference.
To install the system, follow these steps:
- Make sure that the Zend Optimizer is installed on the server. You can check it using the zendtest tool. To do so:
- Download and unzip amiro-install-x.x.zip and upload the file amiro-install-x.x.php to the site root. Here and also in place of amiro-install-x.x.zip you should insert the real installer file name which is located at http://distrib.amirocms.com/distrib/public/installer/. In this example it is amiro-install-2.5.zip
- If you have the distributive archive of the system or the site, upload it to the site root without unzipping it. NOTE: If you upload the file through FTP, make sure that the upload is performed in the BIN mode, not ASCII.
- Open the installation program at this address http://your_domain /amiro-install-x.x.php.
Figure 1
- Insert the parameters to access the database and the email to install the system. Then click “Check again”. Repeat this step until the “Next step” button is available.
Figure 2
- Click on the “Next Step” button to go to the choosing packet window.
- If you uploaded the distributive at step 3, you will see:
Figure 3
- If you have the distributive, but you didn’t upload it at step 3, you can upload it now. Once it is uploaded, click “Check again”.
- If you don’t have the distributive, you can check for the latest version on one of the servers by choosing the desired server and clicking “Refresh list”.
- Choose the desired distributive and click “Next step”. After that, confirm the installation of the required packet.
- Wait as long the installer works.
Figure 4
- At the end of the installation, click “Next step”.
Figure 5
- Fill in all necessary fields and enter the license key. The key also can be installed later in the administrator panel if necessary. The system will also suggest that you delete the existing installers. At the end of the data input, click “Next step”. IMPORTANT! Be sure to enter correct data from the very beginning so that you don’t have to change it later manually. NOTE: It is recommended to delete the installer as soon as the installation has ended for security reasons.
Figure 6
- After the installation is complete you can open the main page of the site or move to the administrator panel.
Figure 7
|
